Types of Lithium-ion

The casual battery user may think there is only one lithium-ion battery. As there are many species of apple trees, so do also lithium-ion batteries vary and the difference lies mainly in the cathode materials. Innovative materials are also appearing in the anode to modify or replace graphite.

Scientists prefer to name batteries by their chemical name and the material used, and unless you are a chemist, these terms might get confusing. Table 1 offers clarity by listing these batteries by their full name, chemical definition, abbreviations and short form. (When appropriate, this essay will use the short form.) To complete the list of popular Li-ion batteries, the table also includes NCA and Li-titanate, two lesser-known members of the Li-ion family.
 

Chemical name	Material	Abbreviation	Short form	Notes
Lithium Cobalt Oxide1 Also Lithium Cobalate or lithium-ion-cobalt)	LiCoO2 (60% Co)	LCO	Li-cobalt	High capacity; for cell phone laptop, camera
Lithium Manganese Oxide1 Also Lithium Manganate or lithium-ion-manganese	LiMn2O4	LMO	Li-manganese, or spinel	Most safe; lower capacity than Li-cobalt but high specific power and long life. Power tools, e-bikes, EV, medical, hobbyist.
Lithium Iron Phosphate1	LiFePO4	LFP	Li-phosphate
Lithium Nickel Manganese Cobalt Oxide1,also lithium-manganese-cobalt-oxide	LiNiMnCoO2 (10–20% Co)	NMC	NMC
Lithium Nickel Cobalt Aluminum Oxide1	LiNiCoAlO2 9% Co)	NCA	NCA	Gaining importance in electric powertrain and grid storage
Lithium Titanate2	Li4Ti5O12	LTO	Li-titanate

Table 1: Reference names for Li-ion batteries.We willuse the short form when appropriate.

¹  Cathode material        ²  Anode material

To learn more about the unique characters and limitations of the six most common lithium-ion batteries, we use spider charts and look at the overall performance. We begin with Li-cobalt, the most commonly used battery for high-end consumer products, and then move to Li-manganese and Li- phosphate, batteries deployed in power tools, and finally address the newer players such as NME, NCA and Li-titanate. 

Lithium Cobalt Oxide(LiCoO₂)

Its high specific energy make Li-cobalt the popular choice for cell phones, laptops and digital cameras. The battery consists of a cobalt oxide cathode and a graphite carbon anode. The cathode has a layered structure and during discharge lithium ions move from the anode to the cathode. The flow reverses on charge. The drawback of Li-cobalt is a relatively short life span and limited load capabilities (specific power). Figure 2 illustrates the structure.

Figure 2: Li-cobalt structure The cathode has a layered structure. Duringdischarge the lithium ions move from the anode to the cathode; on charge the flow is from anode to cathode. Courtesy of Cadex

Li-cobalt cannot be charged and discharged at a current higher than its rating. This means that an 18650 cell with 2,400mAh can only be charged and discharged at 2,400mA. Forcing a fast charge or applying a load higher than 2,400mA causes overheating and undue stress. For optimal fast charge, the manufacturer recommends a C-rate of 0.8C or 1920mA. [BU-402, What is C-rate?] The mandatory battery protection circuit limits the charge and discharge rate to a safe level of about 1C.

Figure 3 summarizes the performance of Li-cobalt in terms of specific energy,or capacity; specific power,or the ability to deliver high current; safety; performanceat hot and cold temperatures; life spanreflecting cycle life and longevity; and cost.The hexagonal spider web provides a quick and easy performance analysis of the battery characteristics.

Figure 3: Snapshot of an average Li-cobalt battery Li-cobalt excels on high specific energy but offers only moderate performance specific power, safety and life span. Courtesy of Cadex

Lithium Manganese Oxide (LiMn₂O₄)

Lithium insertion in manganese spinels was first published in the Materials Research Bulletin in 1983. In 1996, Moli Energy commercialized a Li-ion cell with lithium manganese oxide as a cathode material. The architecture forms a three-dimensional spinel structure that improves ion flow on the electrode, which results in lower internal resistance and improves current handling. A further advantage of spinel is high thermal stability and enhanced safety, but the cycle and calendar life is limited. 

Low internal cell resistance is key to fast charging and high-current discharging. In an 18650 package, Li-manganese can be discharged at currents of 20–30A with moderate heat buildup. It is also possible to apply one-second load pulses of up to 50A. A continuous high load at this current would cause heat buildup and the cell temperature cannot exceed 80°C (176°F). Li-manganese is used for power tools, medical instruments, as well as hybrid and electric vehicles.

Figure 4 shows the crystalline formation of the cathode in a three-dimensional framework. This spinel structure, which is usually composed of diamond shapes connected into a lattice, appears after initial formation.

Figure 4: Li-manganese structure The cathode crystalline formation of lithium manganese oxide has a three-dimensional framework structure that appears after initial formation. Spinel provides low resistance but has a more moderate specific energy than cobalt.  Courtesy of Cadex

Li-manganese has a capacity that is roughly one-third lower compared to Li-cobalt but
the battery still offers about 50 percent more energy than nickel-based chemistries. Design flexibility allows engineers to maximize the battery for either optimal longevity (life span), maximum load current (specific power) or high capacity (specific energy). For example, the long-life version in the 18650 cell has a moderate capacity of 1,100mAh; the high-capacity version is 1,500mAh but has a reduced service life. Laptop manufacturers would likely choose the high-capacity version for maximum runtime; whereas the maker of cars with the electric powertrain would take the long-life version with high specific power and sacrifice on runtime.

Figure 5 shows the spider web of a typical Li-manganese battery. In this chart, all characteristics are marginal; however, newer designs have improved in terms of specific power, safety and life span.
 

Figure 5: Snapshot of a typical Li-manganese battery Although moderate in overall performance, newer designs of Li-manganese offer improvements in specific power, safety and life span. Courtesy of BCG research

Lithium Iron Phosphate(LiFePO₄)

In 1996, the University of Texas (and other contributors) discovered phosphate as cathode material for rechargeable lithium batteries. Li-phosphate offers good electrochemical performance with low resistance. This is made possible with nano-scale phosphate cathode material. The key benefits are enhanced safety, good thermal stability, tolerant to abuse, high current rating and long cycle life. Storing a fully charged battery has minimal impact on the life span. As trade-off, the lower voltage of 3.3V/cell reduces the specific energy to slightly less than Li-manganese. In addition, cold temperature reduces performance, and elevated storage temperature shortens the service life (better than lead acid, NiCd or NiMH). Figure 6 summarizes the attributes of Li-phosphate.

Figure 6: Snapshot of a typical Li-phosphate battery Li-phosphate has excellent safety and long life span but moderate specific energy and and a lower voltage than other lithium-based batteries. Courtesy of BCG research

Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO₂)

Leading battery manufacturers focus on a cathode combination of nickel-manganese-cobalt (NMC). Similar to Li-manganese, these systems can also be tailored to high specific energy or high specific power, but not both. For example, NMC in an 18650 cell for consumer use can be tweaked to 2,250mAh, but the specific power is moderate. NMC in the same cell optimized for high specific power has a capacity of only 1,500mAh. A silicon-based anode will be able to go to 4,000mAh; however, the specific power and the cycle life may be compromised.

The secret of NMC lies in combining nickel and manganese. An analogy of this is table salt, in which the main ingredients of sodium and chloride are toxic on their own but mixing them serves as seasoning salt and food preserver. Nickel is known for its high specific energy but low stability; manganese has the benefit of forming a spinel structure to achieve very low internal resistance but offers a low specific energy. Combining the metals brings out the best in each.

NMC is the battery of choice for power tools and powertrains for vehicles. The cathode combination of one-third nickel, one-third manganese and one-third cobalt offers a unique blend that also lowers raw material cost due to reduced cobalt content. Striking the right balance is important and manufacturers keep their recipes a well-guarded secret. Figure 7 demonstrates the characteristics of the NMC.
 

Figure 7: Snapshot of NMC NMC has good overall performance and excels on specific energy. This battery is the preferred candidate for the electric vehicle and has the lowest self-heating rate. Courtesy of BCG research

Lithium Nickel Cobalt Aluminum Oxide (LiNiCoAlO₂)

The Lithium Nickel Cobalt Aluminum Oxide battery, or NCA, is less commonly used in the consumer market; however, high specific energy and power densities, as well as a long life span, get the attention of the automotive industry. Less flattering are safety and cost. Figure 8 demonstrates the strong points against areas for further development.

Figure 8: Snapshot of NCA High energy and power densities, as well as good life span, make the NCA a candidate for EV powertrains. High cost and marginal safety are negatives. Courtesy of BCG research

Lithium Titanate (Li₄Ti₅O₁₂)

Batteries with lithium titanate anodes have been known since the 1980s. Li-titanate replaces the graphite in the anode of a typical lithium-ion battery and the material forms into a spinel structure. Li-titanate has a nominal cell voltage of 2.40V, can be fast-charged and delivers a high discharge current of 10C, or 10 times the rated capacity. The cycle count is said to be higher than that of a regular Li-ion; the battery is safe, has excellent low-temperature discharge characteristics and obtains a capacity of 80 percent at –30°C (–22°F). At 65Wh/kg, the specific energy is low. Li-titanate charges to 2.80V/cell, and the end of discharge is 1.80V/cell. Figure 9 illustrates the characteristics of the Li-titanate battery.
 

Figure 9: Snapshot of Li-titanate Li-titanate excels in safety, low-temperature performance and life span. Efforts are being made to improve the specific energy and lower cost. Courtesy of BCG research

Figure 10 compares the specific energy of lead, nickel- and lithium-based systems. While Li-cobalt is the clear winner by being able to store more capacity than other systems, this only applies to specific energy. In terms of specific power (load characteristics) and thermal stability, Li-manganese and Li-phosphate are superior. As we move towards electric powertrains, safety and cycle life will become more important than capacity.

Figure 10: Typical energy densities of lead, nickel- and lithium-based batteries
Lithium-cobalt enjoys the highest specific energy; however, manganese and phosphate are superior in terms of specific power and thermal stability.

Courtesy of Cadex